Truck Mounted or Static
- Instant concrete production
- Multi- mix designs from same fill
- Exact quantity ‘drops’
- Nil slump mixes
- Simple to operate and maintain
- Optional silo for bulk cement
- Accurate control of cement to ±1%
Features of all models:
- Resettable counter to show
amount of concrete produced
- Fully hydraulic operation of mixer and conveyor
- Weathertight cement bins
- Simple operator controls
- Mounted on skid base or ready for vehicle chassis
Optional equipment:
- Colouring additive systems
- Mixer power swivel
- Push-button automatic controls
- Admixture systems
- Exclusive CemenTech Fibre feeder
- Water systems
- Additional Cement or aggregate bins
- Onsite commissioning and calibration carried out by qualified ARMCON personnel.
The volumetric method
of
production.
First, sand and aggregate fall onto a
conveyor belt that passes under calibrated strike off gates, and then
under the cement bin. A vane feeder meters the exact amount of cement
onto the aggregate. The conveyor then deposits the dry materials into
the continuous mixing chamber. Here metered amounts of water and
admixtures if used are introduced. The mixer rapidly blends the
ingredients in an inclined tube using a steel- bladed auger. Materials
enter the lower end and the mixed concrete is dispensed at the
discharge end.
Mixing is continuous, producing a steady or intermittent flow of concrete, depending on placement needs.
At any time during production the operator can shut off the mixer and material feed system to stop production or change the mix design. Because only a small amount of material remains in the mixing chamber, mix changes can be made with little or no waste. Any unmixed materials remaining in the storage bins after production are used for future pours.